Exotronic
Exotronic - 20A - In-line Blocking Diode Solar Connector (Pack of 10)
Exotronic - 20A - In-line Blocking Diode Solar Connector (Pack of 10)
Couldn't load pickup availability
Exotronic 20A In-line Blocking Diode Solar Connector - Pack of 10
Reverse Current Protection for Solar Arrays
This pack contains 10 identical Exotronic In-line Blocking Diode Solar Connectors, each combining a standard Ø 4 mm solar connector with a built-in Schottky diode rated at 20A. They are compatible with MC4 connectors and install with a simple plug-and-play connection, with no tools required.
Every connector in the pack shares the same 20A rating - this is not an assorted pack of different current ratings. The Schottky diode has a low forward voltage drop and blocks reverse current flow, helping to protect solar panels and improve system reliability, for example where panels or strings are connected in parallel.
Each connector carries an IP67 waterproof and dustproof rating when mated, with tinned copper contacts and a snap-in locking system, suiting caravan, 4WD, marine and other outdoor solar installations.
Key Features
- 10 x 20A in-line blocking diode connectors, all the same rating
- Schottky diode with a low forward voltage drop to block reverse current flow
- IP67 waterproof and dustproof rating when mated
- Tinned copper contacts for a corrosion-resistant, low-resistance connection
- Snap-in locking for a secure, vibration-resistant connection
- Standard Ø 4 mm connector system, compatible with MC4 connectors
Specifications
| Rated Current | 20A |
|---|---|
| Pack Quantity | 10 x 20A blocking diode connectors (single rating, not an assortment) |
| Diode Type | Schottky, low forward voltage drop |
| Waterproof and Dustproof (Mated) | IP67 |
| Degree of Protection (Unmated) | IP2X |
| Rated Voltage | 1000V DC (IEC) |
| Contact Material | Tinned Copper |
| Insulation Material | PC/PPO |
| Temperature Range | –40°C to +90°C (IEC) |
| Upper Temperature Limit | +105°C (IEC) |
| Flame Class | UL94-V0 |
| Locking System | Snap-in |
| Contact Resistance | 0.5mΩ |
| Safety Class | II |
| Test Voltage | 6kV (50Hz, 1min) |
| Salt Mist Spray Test | Severity 5 (IEC 60068-2-52) |
| Connector System | Ø 4 mm |
Share
