Sick of the glowing lights on your power management display panels or switches keeping you up at night?
Same here... that’s exactly why I made these covers! Designed to fit snuggly over your power management displays and switches, these 'Little Legends' keep the light out of your eyes, stops curious kids from poking at buttons, and protects your panel from accidental bumps.
It’s made right here in Australia (yep, it’s officially Licensed Australian Made), 3D printed from tough Hyper-PLA, and finished with a soft foam inner surround that’s gentle on your panel.
Comes in a growing range of models to suit different displays. Have a display we don't have a cover for? Flick us an email and we'll get one made for you! If its a popular model and you're willing to help us get the dimensions right and test it, we'll send it out free of charge! We can also do different colours for an additional $5 per cover. These will attract a longer lead time as they're printed to order and we may need to get the wire in.
Disclaimer: While 3D printing has come a long way, it’s still not perfect. As such, your covers may show minor visual imperfections such as faint layer lines, small surface blemishes, seam lines where layers meet, and slight variations in texture or colour. These marks are normal signs of the printing process and do not affect the strength or function of the part.
Not bothered by larger imperfections and want to save 80%+ on our 'Little Legend' covers? Check out our 'Seconds' page here.
Covers currently being designed and expected to release soon:
Arctic Campers Electric Roof Switch
Aufocus Diesel Heater Controller
Features:
Licensed Australian Made
Made from tough Hyper PLA
No clips required, just press it on!
Soft foam inner surround
Product Dimensions:
The following dimensions are of the covers themselves, NOT the panel/switch they cover. The panel/switch they cover will be approximately 5mm narrower (length and width) and 3-5mm shorter (height).
Awning Switch* - 54mm (L) x 34mm (W) x 19mm (H)
Projecta PMLCD/PMLCD-BT - 106mm (L) x 106mm (W) x 11mm (H)
Projecta PM4SW10 - 194mm (L) x 100mm (W) x 13mm (H)
*Suits Arctic Frost 15S Camper Awning switch which is approx. 49mm x 26mm. Designed to cover the switch whether it is in the 'Open/Close' or 'Off" positions.
