Ruuvi - Tag Pro Sensor (3in1) - Wireless Temperature, Humidity and Motion Sensor

RuuviTag Pro tolerates wet and rough conditions.

The IP67 certified RuuviTag Pro (3-in-1) comes with a breathable membrane that enables air humidity monitoring. It tolerates temporary wet conditions.

Note! Please keep in mind that Bluetooth signals are strongly attenuated in the water and range will be significantly reduced. Ruuvi sensors can then be used in narrow water if you want to maintain connection (for example pool or jacuzzi). If you want to measure deeper, you can attach the RuuviTag Pro to a string and take it back to the surface when you want to download the data history.

Medical Grade Temperature Accuracy

RuuviTag Pro has an extremely accurate temperature sensor on board. The sensor is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers.

Measurement resolution is  0.01 °C, while absolute accuracy is astounding at ±0.1 °C across the temperature range of –20 to +50 °C, with no calibration.

The sensor units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.

Professional Mounting

RuuviTag Pro has two strong mounting ears that allow reliable installation methods to be used. Wooden ceilings, Gyproc walls, concrete foundations, you name it. Attach and measure professionally wherever you need to.

Wide Temperature Range From -40 to +85 °C

RuuviTag Pro’s casing and electronics are designed to operate without interruption in a wide range of temperatures. Maintenance is minimal because the included Ruuvi CR2477T wide temperature battery lasts up to 2 years.

Victron GX Compatibility

RuuviTag Pro sensors can be read by Victron GX devices (Cerbo GX, Venus GX and CCGX); a Bluetooth USB adapter is required. Temperature and humidity then show on the GX display and the VRM Portal, and the GX relays can be set to switch on temperature, for example to run a fan or a heating pad.