Victron Energy - 24V - 2400W - 24/2k5 - Phoenix Smart - Inverter

Victron 24V Phoenix Inverter Smart 24/2k5: 2400W Continuous for 24V House Battery Systems

The Victron Phoenix Inverter Smart 24/2k5 turns a 24V battery bank into 230 VAC power, with 2400 W continuous output at 25°C and 4000 W peak power for 5 seconds. It suits RVs, caravans, trucks, buses and boats with 24V house batteries.

Key Features:

• 24V Input: Input voltage range of 18.6 to 34 V for 24V battery systems.
• High Start-Up Power: 4000 W peak for 5 seconds, and time limited power of 2500 W for 2 hours or 3200 W for 15 minutes from a cold start.
• Bluetooth Built-In: Fully configurable with a tablet or smartphone, including low battery voltage alarm, cut-off and restart levels, output voltage, frequency and ECO mode settings.
• Dynamic Cut-Off: A load dependent DC low shut down level, fully configurable.
• ECO Mode: The inverter switches to standby when the load drops below a preset value, cutting zero load power to 1.6 W.
• Proven Reliability: Full bridge plus toroidal transformer topology; short circuit proof and protected against overheating.

Designed for the Road

A programmable relay can be set for general alarm, DC under voltage or genset start/stop, and a remote on/off switch can be connected to the two pole connector. LED diagnosis and the VE.Direct port add monitoring and system integration options.

Seamless Integration with 24V Systems

The Inverter Smart connects with M8 bolts on the battery side and screw terminals on the 230 VAC side. Pair it with a Victron Cerbo GX or Ekrano GX for full system monitoring on the VRM portal.

Specifications